Our Products
» WOVEN ROVINGS
» GLASS FIBRE CLOTH
» WOVEN TAPE ( Glass Fibre Tape,Polyester Fibre Tape, Glass+Polyester Tape & Cotton Tape)
» MICA SHEETS & TAPES
» CHOPPED STRAND MAT, DIRECT ROVING & CHOPPED STRANDS
» POLYESTER FILM, KRAFT PAPER (EGIP), CRAPE PAPER, STRETCH FILM & SLITTING SERVICE.
Woven Roving
Description
Fiberglass Woven Rovings are fabrics woven form continuous roving and are produced in various construction, weights and widths. The rovings coated with a special size provide compatibility to polyester, epoxy and phenolic resin and result in laminates of high dry and wet mechanical strengths. Woven rovings give additional strength to large moulded parts and are often used in combination with other reinforcements in roll form.

Advantages
  • Fast wet-out: Minimum roll out and low resin consumption result in uniform laminate clarity and minimal weave distortion.
  • Excellent workability : Softer fabric imparts superior drapability to take difficult contours in complex moulds.
  • High Mechanical Strength: Significantly high mechanical strength in the directions of the weave.
Application
Boat Hull, corrosion-resistant equipment, electrical laminates and tubes, automobile body panels, composite amour, bulletproof helmets, windmill blades, base fabric for coating of PVC, Neoprene, etc.


Process
Hand lay-up moulding, Resin Transfer moulding, Compression Moulding Pultrusion, etc
Product Range
CONSTRUCTION
PRODUCT Width mm
WARP WEFT Weight2g/m
Packing Weightin kgs.
Tex No. Per100 mm Tex No. Per100 mm
WR 250 1040/1250 200 62 200 62 250 35-50
WR 300 1040/1250 300 55 300 47 300 35-50
WR 360
1040/1250 300 61 300 55 360 35-50
WR 400
1040/1250 600 35 600 31 400 35-50
WR 450 1040/1250 600 40 600 35 450 35-50
WR 610 1040/1250 1200 27 1200 24 610 60-75
WR 610 1040/1250 600 55 600 47 610 60-75
(CLOSE WEAVE)              
UNIDIRECTIONAL WARP FABRIC
WR 360
1040/1250 300 94 300 27 360 35-50
(UNIDIRECTIONAL)
             
WR 610 1040/1250 1200 43 300 31 610 60-75
(UNIDIRECTIONAL)
             
Note:
  • All Woven Roving are in Plain Weave.
  • Widths upto 2500mm can be produced.
  • Packing weight can be altered as per requirement.
  • World's best available E-Glass Roving are used to manufacture Woven Rovings.
  • All Woven Roving are compatible with Polyester, Epoxy and Phenolic resin systems.
    PE = Polyester EP= Epoxy PH=Phenolic
Product WR 360 1040 EP
Nomenclature Woven Wt. Width Compatibility
eg Roving g/m2 1040mm (Epoxy)

  Packing
Supplied as rolls sealed in moisture-proof polyethylene bags and packed in HDPE or Hessian bags or Cartons.

Safety Information
Toxicologically harmless, Not respirable.

Standards
Fibreglass Woven Roving are manufactured in accordance with specifications laid down in IS 11273 and BS 3749.
Powered by SynQues - ISO 9001:2008                    © 2010 -www.fibreglassinsulation.in    All Rights Reserved                    Disclaimer | Privacy Policy